Wel-Handy Multi II Tack

Tack welding is made by repeating welding and dry-run traverse alternatively. Automatically switched to maximum speed during dry-run traverse to improve work efficiency.

Ultra-compact & lightweight – The 6.8 kg light weight unit gives improved handling and set-up.
Strong drawbar pull – 16 kg magnetic force assures a stable motion.
Solid structure – Maintenance free aluminum die cast body makes it lighter and durable.
High speed operation – Maximum speed of 1500 mm/min can achieve high-speed welding
Low center of gravity design – Low center of gravity gives constant motion.
High clearance – It can run over weld beads easily.
Easy data input – Tack information is digitally input and stored to ensure repeatability. Data is input by distance not time to ensure same welding length at different speed. It can include arc stable timer, crater time and crater fill distance in the parameters.
Digital display – Digital display shows actual parameters or welding speed.

Machine Weight		Standard Magnet Model: 6.9 kg
		Strong Magnet Model: 7.5 kg
Machine Dimension(W×D×H)		277mm(W)×255mm(D)×264(H)
Traction Force		16kg
Gap(F.L. ~ Bace Board)		6mm
Magnet Up and Down Mechanism		Magnet Lever
Driving Method		4-Wheel Driving Rubber Roller (Chain Transmission)
Magnet-type		Permanent Magnet
Traverse Speed		50~1500mm/min
Tracing Method		Guide Roller (being pushed against Vertical plates)
Applied Posture		Standard Magnet Model: Horizontal position Fillet Welding
		Strong Magnet Model: Vertical position Fillet Welding
Torch Adjust Range	Torch Angle	40°~55°
	Up and down	45mm
	Forward and Backward	45mm
	Forward and Angle	5° Angle at both Forward / Backward
Automatic Stop Function		Limit Switch
		(equipped at both sides of Carriage at FL +20 mm height)
Fine Adjustment of Carriage Position		Included
Non-Welded Portion		Approximately 270 mm
		(in total at both Start and End point)
Power Cable		Y-Branch Cable (Power and Signal cable Integrated)
		● Carriage ~ Branch: 6 m,
		● Branch ~ Power: 10 m,
		● Branch ~ Wire Feeder: 0.5 m (with matching Panasonic-type Connector)
		※ Please consult when using welding machine other than Panasonic.
Welding Torch		Straight WHM (C) – 350S & 500S
		Curved 350A & 500A
Torch Hold Diameter		Straight Torch Holder: φ20 mm
		Curved Torch Holder: φ16~20 mm Diameter
Motor		DC Motor with Encoder
Input Power		AC100~240V　50/60Hz

Join our mailing list: