| Machine Weight |
Strong Magnet Model: 9.8 kg |
| Machine Dimension(W×D×H) |
310mm(W)×265mm(D)×264(H) |
| Traction Force |
12kg |
| Gap(F.L. ~Bace Board) |
6mm |
| Magnet Up and Down Mechanism |
Magnet Lever |
| Driving Method |
4-Wheel Driving Rubber Roller (Chain Transmission) |
| Magnet-type |
Permanent Magnet |
| Traverse Speed |
50~1500mm/min |
| Tracing Method |
Guide Roller (being pushed against Vertical plates) |
| Applied Posture |
Standard Magnet Model: Horizontal position Fillet Welding |
| Strong Magnet Model: Vertical position Fillet Welding |
| Torch Adjust Range |
Torch Angle |
40°~55° |
| Up and down |
45mm |
| Forward and Backward |
45mm |
| Forward and Angle |
5° Angle at both Forward / Backward |
| Automatic Stop Function |
Limit Switch (equipped at both sides of Carriage at FL +20 mm height) |
| Fine Adjustment of Carriage Position |
Included |
| Non-Welded Portion |
Approximately 305 mm (in total at both Start and End point) |
| Power Cable |
Y-Branch Cable (Power and Signal cable Integrated) |
| ● Carriage ~ Branch: 6 m, |
| ● Branch ~ Power: 10 m, |
| ● Branch ~ Wire Feeder: 0.5 m (with matching Panasonic-type Connector) |
| ※ Please consult when using welding machine other than Panasonic. |
| Welding Torch |
Straight WHM (C) – 350S & 500S |
| Curved 350A & 500A |
| Torch Hold Diameter |
Straight Torch Holder: φ20 mm |
| Curved Torch Holder: φ16~20 mm Diameter |
| Motor |
DC Motor with Encoder |
| Input Power |
AC100~240V 50/60Hz |
