Wel-Handy Multi II Standard

Wel-Handy Multi II series succeeds merits of conventional model such as light weight, strong traction force, and extensibility for various works. And Wel-Handy Multi II series are renewed for higher performance.

Built-in Permanent Magnet – By turning down the lever on side of machine, built-in magnet is attracted to the steel plate, it demonstrates the high traction pulling the torch lead.
Aluminum Die-cast Body – The aluminum die-cast molded body provide its light-weight and sturdy.(Net Weight 7kg by Standard Specification）
Torch Slide unit – Each 45mm of adjustment has been ensured in back and forth, up and down. Smooth operability, it can be fine adjusted the torch position even during welding.
Guide Roller Arm – No need to install a rail. Guide Roller Arm will trace the surface of vertical plate. Besides standard type shown in the picture, other types of Guide Roller Arm are also available as option for various different applications.

Machine Weight		Standard Magnet Model: 6.9 kg
		Strong Magnet Model: 7.5 kg
Machine Dimension(W×D×H)		277mm(W)×255mm(D)×264(H)
Traction Force		16kg
Gap(F.L. ~ Bace Board)		6mm
Magnet Up and Down Mechanism		Magnet Lever
Driving Method		4-Wheel Driving Rubber Roller (Chain Transmission)
Magnet-type		Permanent Magnet
Traverse Speed		50~1500mm/min
Tracing Method		Guide Roller (being pushed against Vertical plates)
Applied Posture		Standard Magnet Model: Horizontal position Fillet Welding
		Strong Magnet Model: Vertical position Fillet Welding
Torch Adjust Range	Torch Angle	40°~55°
	Up and down	45mm
	Forward and Backward	45mm
	Forward and Angle	5° Angle at both Forward / Backward
Automatic Stop Function		Limit Switch (equipped at both sides of Carriage at FL +20 mm height)
Fine Adjustment of Carriage Position		Included
Non-Welded Portion		Approximately 270 mm (in total at both Start and end point)
Power Cable		Y-Branch Cable (Power and Signal cable Integrated)
		● Carriage ~ Branch: 6 m,
		● Branch ~ Power: 10 m,
		● Branch ~ Wire Feeder: 0.5 m (with matching Panasonic-type Connector)
		※ Please consult when using welding machine other than Panasonic.
Welding Torch		Straight WHM (C) – 350S & 500S
		Curved 350A & 500A
Torch Hold Diameter		Straight Torch Holder: φ20 mm
		Curved Torch Holder: φ16~20 mm Diameter
Motor		DC Motor with Encoder
Input Power		AC100~240V　50/60Hz

Join our mailing list: