CNC Type - HPG500NC Series

Features

• Standard Conversational Software – Standard grinding mode, plunge / traverse / side / taper grinding is possible. With or without dressing during the cycle can be set. Cross feed stroke by teaching after which manually control by manual handwheel without over travel
• Standard Conversational Software – Outer circumference dress / biconvex R type dress / single convex R type dress / V type dress / angle type dress / R + taper type dress / single concave R type dress / free type dress (OP macro). Single dress / Can be used with molded dresses.
• Composite Grinding Mode – Composite grinding mode The target shape can be selected from flat surface, molding, steps or pitch.
• Hand Operated – Handle Synchronization – Arc radius or taper feed is possible when manual Cross feeding automatically synchronize with Vertical feeding movement
• Lubrication Oil (No Hydraulic Oil) – Maintenance-free because there is no need to change oil. Basically only 3 liters of lubrication oil is require
• Co 2 Emission CO2 emission reduction of 656kg / kWh (emission factor 2.93kg-CO2 / kg x 40L x national average 6.59) due to waste oil treatment of industrial waste.
• Power Consumption – Power consumption reduction Compared to hydraulically driven machines, power consumption is reduced by about 60% annually.
• Thermal Displacement – Thermal displacement reduction The hydraulic drive system required oil temperature control, but by eliminating the oil that is the cause of thermal displacement, high-precision machining is achieved.