Screw Fastening Counter

Equipped with “Stepless Speed Adjustment” function and “Soft Start” function
“Count Correction” function does not count fastening errors such as elevated screws or double fastening
“Count Back (Count Return)” function: When a screw is loosened, a reverse signal output from the electric screwdriver reverses the count by one
Up to four different screw fastening settings can be saved in the internal memory for a wide variety of assembly work
“Link Connection” function: Up to 10 screwdriver/controller sets can be connected in series
Good for left-handed operators who find built-in counter models difficult to use

Model	DLR70S-WGB
Power Source	100 – 240 V AC, 50/60Hz
Output Voltage	40 V DC
Speed Control Function	60 to 100%
Soft Start Function	0 to 2 sec.
Count	0 to 99
Allowable Number of Screw Fastening Programs	4
Counting Method	Count-up / Count-down
Count Correction Function	Count normal fastening only
Self Adjustable Timer Setting	0.01 to 0.99 sec.
OK Output Timer Setting	0 to 9.5 sec.
Count Back Function	ON / OFF
OK / NG Buzzer	ON / OFF
Input Signal(PNP)	WORK / RESET / LINK-IN / CH1 / CH2 / TORQUE CHECK
Output Signal(Relay contact)	OK / NG / LINK-OUT / TORQUE UP
Mass (g [Ibs])	2100 [4.63]
Size W × L × H (mm [inch])	117 × 325 × 76 [4.61” × 12.80” × 2.99”]
Bit Grounding	Ready (With a 1 MΩ resistor)
Standard Accessories	Power cord (2 m): 1 pc. Fuse (5 A): 1pc.

Join our mailing list: