PNC-11 Flex

PNC-11 Flex is a affordable CNC cutting machine, suitable for both oxy-fuel and plasma cutting. The new D421 controller is equipped with integrated plasma controller, allowing initial torch height sensing and torch height control during cutting. Designed with extra rigid aluminium construction, achieving quality cuts and portability at once. Various configuration and options available to provide extended possibilities.

CNC-integrated plasma control unit
Initial torch height sensor and arc voltage height control are integrated in the CNC, maintaining constant torch height throughout the cut.
Simple operation
D421 CNC controller is easy to operate and has highly customizable parameters.
Rigid Crossbar with steel guiding
Extra wide aluminium extrude crossbar with steel guiding system assures stable movement throughout the range.
Lightweight longitudinal rail
High-precision aluminium alloy rail provides portability and quality cuts.
Suitable for both plasma and oxy-fuel cutting
PNC-11 FLEX is designed for both oxy-fuel and plasma cutting. With optional Plasma to Oxy-Fuel conversion kit, PNC-11 FLEX is allowing wide variety of cutting job to be performed.

Type		1530	1570
Effective cutting area		1500 x 3000 mm	1500 x 7000 mm
Rapid travel speed		5000 mm/min
Maximum cutting speed		4000 mm/min
Control axis		2-axis (X and Y)
Motor: X-axis and Y-axis		Stepping Motor
Motor: Torch lifter		DC motor
Driving method		Rack and Pinion
Rail system X-axis and Y-axis		Linear rod guiding
Heat shield		Provided at side of the machine body and at torch lifter
Input voltage		Selectable with internal switch. Single phase 100 – 120V / 220-240V
CNC: Main features	Model	KOIKE D421
	Display	7 inch colour
	Program input	Manual MDI or by USB
	Preinstalled cutting patterns	47 shapes
	Program format	EIA format
	Functions	Pattern nesting, rotation, mirror, recovery, piercing selection and more.
Plasma configuration: features	Plasma system	Not included
	Maximum cutting thickness	Depends on Plasma power source
	Initial torch height control	Yes
	Torch collision protection	Yes
	Arc Voltage torch height control	Yes
	Ratio of arc voltage output for AVC	50:1 : External voltage divider is NOT required 1:1 : External voltage divider is REQUIRED

Join our mailing list: